Payment & Shipping Terms:
|Frequency::||50Hz/60Hz||Number Of Phase:||7P|
|Display:||Counter Type||Accuracy Class::||0.5S|
din rail watt hour meter,
din rail mounted energy meter
DTS - 4R 3 Phase KWH Meter DIN Rail Active Electronic Energy Meter Register Display
DTS-4R 3-Phase DIN rail Energy Meter accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3.Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May select 6+1 digits display (Product Configuration code is AK).
4.Standard configuration one port of pulse output passive (polarity),May select increase a distant port of pulse output passive (nonpolarity), (Product Configuration code is AI).
5.And contact with all kind of AMR system conveniently,complying with standard IEC 62053- 31 and DIN 43864.
6.Two LED instructions power supply state (green) and signal of energy impulse (red).
7.Standard configuration dont detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
8.Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
|Rated Voltage(V)||Three-phase three-wire 3x100V or 3x380V
Three-phase four-wire 3x200/380V or 3x57.7/ 100V
|Rated Frequency(Hz)||50 or 60|
|(Accuracy class)||Class 1.0 or Class 2|
Contact Person: zhuanc